北京大学学报自然科学版 ›› 2020, Vol. 56 ›› Issue (4): 703-709.DOI: 10.13209/j.0479-8023.2020.033

上一篇    下一篇

负载零价铜的纳米多孔碳材料催化氧化罗丹明B的研究

王爱德1, 冯振东1, 覃大禹2, 张丽娟1, 朱丽丽1, 张善发1, 陶虎春1,†   

  1. 1. 深圳市重金属污染控制与资源化重点实验室, 北京大学深圳研究生院环境与能源学院, 深圳 518055 2. 中山大学物理学院, 广州 510275
  • 收稿日期:2019-05-13 修回日期:2019-05-22 出版日期:2020-07-20 发布日期:2020-07-20
  • 通讯作者: 陶虎春, E-mail: taohc(at)pkusz.edu.cn
  • 基金资助:
    深圳市基础研究项目(JCYJ20180503182130795)和流域生态工程学学科建设资金(深发改[2017]542号)资助

Study on the Catalytic Oxidation of Rhodamine B by Nanoporous Carbon Materials Loaded with Zero Valence Copper

WANG Aide1, FENG Zhendong1, QIN Dayu2, ZHANG Lijuan1, ZHU Lili1, ZHANG Shanfa1, TAO Huchun1,†   

  1. 1. Shenzhen Key Laboratory for Heavy Metal Pollution Control and Reutilization, School of Environment and Energy, Peking University Shenzhen Graduate School, Shenzhen 518055 2. School of Physics, Sun Yat-sen University, Guangzhou 510275

  • Received:2019-05-13 Revised:2019-05-22 Online:2020-07-20 Published:2020-07-20
  • Contact: TAO Huchun, E-mail: taohc(at)pkusz.edu.cn

摘要:

以铜基MOF (HKUST-1, [Cu3(BTC)2], BTC为1,3,5-苯三甲酸)为模板, 利用一步碳化法制备负载零价铜的纳米多孔碳材料NPC@Cu。以此 NPC@Cu为催化剂, 活化过一硫酸氢钾(PMS), 在常温常压下异相催化氧化处理模拟的偶氮染料废水。采用电子显微镜(SEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)等技术对催化剂进行表征, 并研究反应过程中催化剂投加量、氧化剂投加量和初始pH值对降解效率的影响。实验结果表明, 在催化剂用量为0.1 g/L, PMS浓度为2.00 mmol/L, pH值为7的条件下, 反应进行45分钟后, 浓度为0.10 mmol/L的RhB降解率可达到 100%。通过自由基捕捉实验, 证明体系中存在SO4·和·OH两种自由基,表明NPC@Cu是一种性能良好的催化材料。

关键词: MOF材料, 纳米多孔碳材料, 零价铜, 过硫酸盐, 罗丹明B (RhB)

Abstract:

Nanoporous carbon material loaded with zero-valent copper NPC@Cu was synthesized by one-step carbonization method using copper-based MOF (HKUST-1, [Cu3(BTC)2], BTC as 1,3,5-benzenetricarboxylic acid) as template. With NPC@Cu as catalyst, peroxymonosulfatesulfate (PMS) was activated as oxidant to treat simulated azo dye wastewater by heterogeneous catalytic oxidation at ambient pressure and room temperature. The catalysts were characterized by electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), etc. The effect of degradation efficiency of the catalyst dosage, oxidant dosage and initial pH during the reaction were studied. The experimental results showed that the degradation rate of 0.10 mmol/L RhB can reach 100% after 45 minutes of reaction at a catalyst dosage of 0.1 g/L, a PMS concentration of 2.00 mmol/L and a initial pH of 7. Through the free radical trapping experiment, it proved that there are two free radicals in the system—SO4·and ·OH, and NPC@Cu is a catalytic material with good catalytic performance.

Key words: MOF materials, nanoporous carbon materials, zero-valent copper, persulfate, Rhodamine B (RhB)