面向医疗电子应用的16位RISC MCU设计与实现

北京大学学报（自然科学版）

面向医疗电子应用的16位RISC MCU设计与实现

王腾,谢峥,赵月明,王新安,胡子一,张旭

北京大学深圳研究生院集成微系统科学工程与应用重点实验室, 深圳 518055;

收稿日期:2012-05-22 出版日期:2013-07-20 发布日期:2013-07-20

Design and Implementation of 16-bit RISC MCU for Medical Electronics Applications

WANG Teng, XIE Zheng, ZHAO Yueming, WANG Xin’an, HU Ziyi, ZHANG Xu

Key Lab of Integrated Micro System Science Engineering and Application, Shenzhen Graduate School of Peking University, Shenzhen 518055;

Received:2012-05-22 Online:2013-07-20 Published:2013-07-20

摘要/Abstract

摘要： 通过医疗电子的应用需求分析, 提出一款具有专用指令集的微处理器结构: PKU-DSPII。该结构采用多级存储并内嵌直接存储访问控制器, 包含多种系统控制模块且接口丰富, 支持3种启动模式并可进行系统自动升级。PKU-DSPII采用CSMC 0.18 μm工艺和LQFP封装实现, 芯片面积为3.2 mm×3.2 mm, 在100 MHz工作频率下实测功耗为96.9 mW。

关键词: 专用指令集, 低功耗设计, 数据冲突, 启动程序, 微控制器

Abstract: By analyzing the application demand of the medical electronics, an MCU architecture named PKU-DSPII with application specific instruction set is proposed. Multilevel storage structures with direct memory access controller (DMAC) and abundant system control modules and peripheral interfaces are integrated in the MCU, which supports three booting modes including self-updating mode. PKU-DSPII is implemented with CSMC 0.18μm technology and LQFP package while the die area is 3.2 mm×3.2 mm and the measured power consumption is 96.9 mW at working frequency of 100 MHz.

Key words: micro control unit, application specific instruction set, low-power design, data-flow conflict, bootrom program

中图分类号:

TN47

王腾,谢峥,赵月明,王新安,胡子一,张旭. 面向医疗电子应用的16位RISC MCU设计与实现[J]. 北京大学学报（自然科学版）.

WANG Teng,XIE Zheng,ZHAO Yueming,WANG Xin’an,HU Ziyi,ZHANG Xu. Design and Implementation of 16-bit RISC MCU for Medical Electronics Applications[J]. Acta Scientiarum Naturalium Universitatis Pekinensis.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://xbna.pku.edu.cn/CN/

https://xbna.pku.edu.cn/CN/Y2013/V49/I4/552