Acta Scientiarum Naturalium Universitatis Pekinensis

Previous Articles     Next Articles

Design of a 3.1-10.6GHz Ultra Wideband Low Noise Amplifier

SONG Ruifeng, LIAO Huailin, HUANG Ru, WANG Yangyuan   

  • Received:2006-02-22 Online:2007-01-20 Published:2007-01-20

3.1~10.6GHz超宽带低噪声放大器设计

宋睿丰,廖怀林,黄如,王阳元   

Abstract: A 3.1-10.6GHz ultra wideband LNA was designed using standard 0.35μm SiGe HBT process. The simulation result shows that, with careful selection of circuits structure and device parameters, it is possible to fabricate a UWB LNA using standard 0.35μm SiGe HBT process. In the designed band, the S11and S22 of the designed LNA is better than -8dB, and the S21 is about 11dB with supply voltage of 2.5V and draws a current of 4.38mA, and the noise figure of the LNA is 3.5dB.

Key words: low noise amplifier, ultra wideband, S21, noise figure

摘要: 采用标准0.35μm SiGe HBT工艺设计了工作频段在3.1~10.6GHz的超宽带低噪声放大器。从宽带电路和高频电路设计的器件选择、电路结构选择等方面讨论了超宽带低噪声放大器的设计。结果表明,通过合适的电路结构和器件参数选择,可以采用0.35μm SiGe HBT工艺制备满足超宽带系统要求的低噪声放大器。在整个工作频段内所设计的低噪声放大器输入输出匹配S11和S22均优于-8dB,噪声系数为3.5dB,电路的工作电压为2.5V,电流消耗为4.38mA。

关键词: 低噪声放大器, 超宽带, 正向增益S21, 噪声系数

CLC Number: